Dellorto K27 slide needle, generally used in US spec carbs

Also known as Guzz ref. 29937705. Standard needle clip position is 2nd groove from top

 This part is available by special order, request a quote

 17937767 GU17937767 17 93 77 67
 1793 7767 1793.7767 17.93.77.67

Complete right hand PHF 30 carb, supplied ready to fit with cable adjuster. Suitable as a replacement for the discontinued square slide VHB30 carb

Jetted to suit your model.
M48 x 1.25 Threaded air intake connection.
44mm Rubber sleeve type engine connection. Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 28112644 and 28112600.
Use FUA30611 manifold kit. For cables use CAA17562 with standard plastic twinpull twistgrip or CAA20000 with Tommaselli 2C twistgrip

 This part is available by special order, request a quote

 28112610 GU28112610 28 11 26 10
 2811 2610 2811.2610 28.11.26.10

Complete left hand PHF 30 carb, supplied ready to fit with cable adjuster. Suitable as a replacement for the discontinued square slide VHB30 carb

Jetted to suit your model.
M48 x 1.25 Threaded air intake connection.
44mm Rubber sleeve type engine connection. Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 28112645.
Use FUA30611 manifold kit. For cables use CAA17562 with standard plastic twinpull twistgrip or CAA20000 with Tommaselli 2C twistgrip

 This part is available by special order, request a quote

 28112611 GU28112611 28 11 26 11
 2811 2611 2811.2611 28.11.26.11

Dellorto K23 slide needle for PHF 30 - PHF 36 and PHM 40 carbs

Standard needle clip position is 3rd groove from top

 This part is available by special order, request a quote

 28937711 GU28937711 28 93 77 11
 2893 7711 2893.7711 28.93.77.11

Dellorto AB268 needle jet or atomiser

 This part is available by special order, request a quote

 28935550 GU28935550 28 93 55 50
 2893 5550 2893.5550 28.93.55.50

Dellorto K18 slide needle

Standard needle clip position is 3rd groove from top

 This part is due back in stock soon, call 01484 841395 to reserve yours

Fuel pipe assembly including 'x' crossover piece

See FUA00004 for pipe clips. Can also be used in place of Guzzi ref. 12106501 on Loop frame models if cut to length

 This part is due back in stock soon, call 01484 841395 to reserve yours

29106500-z 29106500 GU29106500 29 10 65 00
 2910 6500 2910.6500 29.10.65.00

Also fits Guzzi V7 Special, V7 700

Dellorto kit containing mixture screw, o ring, spring and washer

For most VHB, PHBH, PHF and PHM carbs, check length before ordering, FUA60854 is alternative screw

 Availability varies on this part, check availability

 13936600 GU13936600 13 93 66 00
 1393 6600 1393.6600 13.93.66.00

S&B air filter. Chromed back, includes clip

This K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. Fits PHBH 30, PHBH 28 and VHB 30 Dellorto carbs. See SIA00055 if you require a shorter but larger diameter filter. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

 This part is due back in stock soon, call 01484 841395 to reserve yours

K&N high performance air filter

• High Air Flow with Excellent Filtration
• Designed to Increase Horsepower and Acceleration
• Washable and Reusable
• Will NOT Void Vehicle Warranty
• Lasts up to 50,000 miles before cleaning is required depending on driving conditions
• K&N Million Mile Limited Warranty�
• Emissions Legal
• Economical, a K&N Air Filter Will Last the Life of Your Bike
• Works with Original Equipment Manufacturer Vehicle Electronics
• Easy High Performance Add-on
• Environmentally Friendly

 This part is available by special order, request a quote

28113660-z 28113660 GU28113660 28 11 36 60
 2811 3660 2811.3660 28.11.36.60